Skip to content
HIT YOUR TARGET!
Shop Our Categories
Street Billet Turbos
S Series Turbos
Class Legal Turbochargers
Turbo Rebuild Kits
Drop In Wheel Upgrades
Turbosmart Wastegates and Bovs
V-Band Assembly's, Clamps and Flanges
Street "carr" fabrication
Maven Turbo Mounts
Go Lithium Battery
Dual Seal Connector Kits
Diesel Air Shutoffs
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (3.00"
Usually Ships in 2 to 3 Business Days
Here we have a in house design for all 6BT Cummins 5.9 12 & 24 valve Diesel owners.These intake cover plates are CNC Laser cut from USA made 304 stainless steel for way superior quality and finish. These stainless plates will never rust, tarnish, crack, chip, or oxidize, EVER!!! No more polishing. These have shown no failures on our trucks at up to and beyond 100# of boost with no loss of boost pressure. Ever wonder why your charge tube pops off even when bead rolled with the best clamps at high boost pressures sometimes? It's because your stock cover plate with actually move and stretch under boost levels it was not designed to handle. (over 30#)These plates also allow you to relocated your MAP sensor and your boost gauge port closer to where the boost is actually effective. You could have 80# at the horn and only 65# in the intake plenum because of boost loss in a gasket, cracked flange your anything before the plenum.There is also plenty of room for injectors for water injection, NOS, or propane.These use the standard 8mm hardware that your intake accepts from the factory. We supply 304 stainless hardware (not shown in picture) with the plates which will work with the stock fuel rail and with our custom intake horn flange as a heater grid/block delete. This will also work with the stock heater grid and intake horn or any after market intake horn as well.They are shipped blank with mounting holes and a 3.0" hole for the inletOur custom intake horn flange has a 3.005 hole which will accept all 3" tubing available.With this listing you will get: 1- 304 Stainless steel cover plate with mounting holes and 3" intake horn hole 10- Short 304 Stainless socket head mounting bolts 4- Long 304 Stainless socket head mounting bolts for the mounting flange thickness you choose.*Common rail please choose this configuration so we can supply the 3 correct bolts for the fuel rail.Some reworking of the fuel lines will be required if using the stock fuel rail and lines with 3/8" and 1/2" plates.*If you are not purchasing a flange we will not ship any bolts for the horn.These area available in 3 different thicknesses: 1/4" 3/8" 1/2" In house custom polish is available for 40.00 on this intake plate. Just select Yes! when adding to cart.
6.7 Hole Horn Flange Mild Steel
03-12 Dodge CR Cummins Air Intake Temp Sensor Weld Bung
Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate (Factory square
Cummins intake horn flange for 3.00" tubing
TWIN!!! Cummins Turbo Diesel 6BT 5.9L 12 & 24 valve Custom Intake Manifold Plate
Share your knowledge of this product.
Be the first to write a review »